Purification System
LABWAN Ultra Purification System LWPS-11
Model LWPS-11
In Stock
LABWAN LWPS-11 Ultra Purification System is designed to produce Type I Ultrapure Water and Type II Pure Water directly from potable tap water through multi-stage purification technology. The system combines RO, DI, UV, polishing and final filtration with intelligent monitoring and automated operation.
ISO 9001 Certified
Service & Support
Key Features
- Intelligent LCD Monitoring
- RFID-Enabled Consumables
- Multi-Stage Purification Technology
- Type I Ultrapure Water Production
- Type II Pure Water Production
- Consistent High-Purity Water
- Compact, Reliable & Easy to Operate
- Low Maintenance & High Performance
- Automatic RO Membrane Flushing
- Real-Time Conductivity, Resistivity & TOC Monitoring
- Live Tank Level Indication
- Automated Volumetric Dispensing
- UV Lamp Operational-Hours & Dispensed-Volume Tracking
- Integrated Diagnostics
- RFID Identification of U-Pak® Cartridges
Specifications
| Parameter | Value |
|---|---|
| Product | Ultra Purification System |
| Feed Water Quality | Potable Tap Water Feed |
| Feed Water Conductivity | < 2000 μS/cm at 25°C |
| Feed Water TOC | < 2000 ppb |
| Feed Water Pressure | 1 – 6 bar |
| Feed Water Temperature | 5 – 35 °C |
| Feed Water Chlorine | < 3 ppm |
| Feed Water Fouling Index | < 12 |
| Feed Water pH | 4 to 10 pH units |
| Ultrapure Water Quality | Type I - Ultrapure Water |
| Resistivity | 18.2 MΩ·cm @ 25°C |
| Conductivity | 0.055 μS/cm @ 25°C |
| TOC (Total Organic Carbon) | <5 ppb |
| Particulates (> 0.22 μm) | No particle > 0.22 μm/mL |
| Microorganisms / Bacteria | < 0.01 cfu/mL |
| Endotoxins (Pyrogens) | < 0.001 EU/mL |
| RNases | < 1 pg/mL |
| DNases | <5 pg/mL |
| Proteases | <0.15μg/mL |
| Flow Rate (Dispensing) | 2 L/min |
| Purification Process | Pre-treatment → RO → DI → Type II Pure Water → Ultra Purification → UV Oxidation → 0.22 μm Point-of-Use Filtration → Type I Ultrapure Water |
| RO Water Quality | Type II - Pure Water |
| Resistivity | > 5 (Typically 10 – 15) MΩ·cm @ 25°C |
| TOC (Total Organic Carbon) | < 30 ppb |
| Bacteria Level | < 10 cfu/mL |
| Flow Rate | 8 or 16 L/hr |
| Voltage | 230V with 50 Hz |
| Frequency | 50-60 Hz ±10% |
| Main Fuse | 3.15 Amp Fast Acting; 5 mm x 20 mm; 250 V safety voltage. |
| Power Used | 145 VA |
| Power Cord Length | 2.5 metres |
| Electrical Ground | Earth Grounded |
| Power Cord use | The System is powered on and off by removing the power cord from the wall outlet. The power cord should be plugged into a wall outlet that is accessible. |
| Altitude | < 3000 metres |
| Ambient operating temperature | 4 – 40°C |
| Ambient storage temperature | 4 – 40°C |
| Installation Category | II |
| Location | The System is intended for indoor use only. |
| Pollution Degree | 2 |
| Relative humidity during storage and operation | Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C. |
| Dimensions (W x H x D) | 1150 mm x 800 mm x 220 mm |
| Operating Weight | 35 kg (Filled with water) |
| Dry / Shipping Weight | 30 kg |
| Dispensing Control | Volumetric (100 mL to 60 L) & Low/Med/High Flow |
| Recirculation System | Automatic periodic recirculation loop to maintain purity |
| Display & Monitoring | In-line Resistivity, Temperature, and TOC Monitoring |
| P-Pak® Cartridge | Standard (Pre-treatment with RFID) |
| UV 254 nm Lamp | Optional (Bactericidal Module) |
| UV 185/254 nm Lamp | Standard (Dual Wavelength TOC Reduction) |
| U-Pak® Pack | Standard (Polishing Ion-Exchange with RFID) |
| 0.22 µm Capsule Filter | Standard (Point of Delivery Microfiltration) |